Probably because there’s also permission to use the X11 socket.

I think you’d have to modify the edid, since you’re setting a custom refresh rate, not a hidden one.

I’ve use wxEDID to force enable VRR before.

Well, aren’t you glad they’re removing go-git then!

Does it also restore the content of unsaved files of the application?

That’s up to the application.

If not, I’ll prefer systemctl hibernate. I wonder, what this new feature is for.

I believe this is for storing the position of specific windows, for multi-window applications (e.g. GIMP’s multi-window mode). So hibernation is very unrelated.

I’ve had the same experience, you’re much better off RDPing into the VM. But I’d like to know if anyone has a better solution that doesn’t require an extra GPU.

On Asus motherboards you can enable ‘Memory Context Restore’, and it’ll remember the training. Unfortunately it seems rapid changes in the weather make my system unstable with it on.

cant move services as every other service sucks

What are your requirements?

I use Tidal and I know High/Max quality works in the web UI, just needs widevine support.

if they use AMD that’s better on linux, they don’t need to know what a GPU driver is.

Same goes for Intel, unless they need to use OneAPI.

That looks to be Volcanic Islands, which has good support with amdgpu and no support by radeon, according to Wikipedia.

I’m not sure what you meant by “set up radron kernel driver”, but you could maybe try blacklisting it.

I believe if your swap partition is on an encrypted LVM, you can still hibernate with kernel lockdown enabled.

Along with VRR over HDMI not being well supported, sometimes the monitors own EDID is a little buggy and Linux can’t guarantee VRR will work properly.

I wrote a blog post a while ago on fixing EDIDs, but it was pretty much a guessing game on what to change: https://stevetech.me/posts/force-enable-vrr-edid

I’ve had to do that with both Samsung and MSI monitors so far. If you’d like to post your EDID, I could check it myself with what I know.

Epic!

I’ve never seen that on modern AMD stuff that uses radv, but I’m sure it’s probably fine.

Yep!

Oh whoops yeah there is, run sudo update-grub.

But otherwise that config looks correct.

Cool, you’re going to have to enable Sea Islands (CIK) support for amdgpu. You should just have to add radeon.cik_support=0 amdgpu.cik_support=1 to your kernel parameters. You’re probably using GRUB so to do that you’ll need to run sudo nano /etc/default/grub to edit it’s config file, then add the above to the end of GRUB_CMDLINE_LINUX_DEFAULT (keep it in the quotes, but space seperated from the previous parameter). Then reboot and hopefully Vulkan works!

Alternatively, there’s a section on the Arch Wiki for this, it should work fine for Mint too: https://wiki.archlinux.org/title/AMDGPU

Could you post the output of vulkaninfo including any errors that it might also print.

If it’s not shown, what GPU do you have?

Also run lspci -k, is your GPU using amdgpu or the old radeon driver?

Total Commander

I’ve started recommending Amaze, it’s free, open source, and easy to use.

Although I still use Solid Explorer for myself, but only because I’ve paid for it and know how it works.

Both have SMB support, since copying files to and from my server is pretty much my only need for a file manager.

A reverse proxy by itself doesn’t do much security wise. You could possibly setup some sort of authentication, attempt blocking, and rate limiting (in the reverse proxy, don’t trust the DVR), but it’ll probably also break the DVR even more.

There’s bots that port scan and specifically target all sorts of stuff, and DVRs are a very common target. With a VPN in the way, there’s no way of knowing what’s there. A VPN also shouldn’t break the web UI.

I really wouldn’t expose a DVR to the internet, and especially not RTSP, those sorts of things get brute forced all the time, and you can find websites full of hacked cameras.

What I would do is run a VPN server (maybe Wireguard) on your Pi, and VPN in when you want to look at your cameras.

Are you only using QEMU, or are you using some sort of wrapper around it? QEMU is quite advanced, if you aren’t already, I’d recommend you use some sort of GUI like virt-manager or something.

Can you share your config?

Does it BSOD or just reboot after the Windows logo?

You might have to pass the drives through as IDE, Windows might not have the proper drivers for anything else. Once you can get it booting you can mount a blank drive as virtio, install the virtio drivers, and then change the OS drive to virtio.