so it seems that without any config, the traffic passes from wlan1 to wlan0’s network flawlessly; but traffic from wlan0 network stops at the Android device, even with iptables -P FORWARD ACCEPT, so I’m clueless on what to do next

how could I set up NAT like this ? thanks

ip r

default via 192.168.15.1 dev enp3s0 proto dhcp src 192.168.15.32 metric 100
192.168.15.0/24 dev enp3s0 proto kernel scope link src 192.168.15.32 metric 100
192.168.38.0/24 via 192.168.15.21 dev enp3s0    

It seems that a namespace only has access to process that originates inside itself

systemctl --user list-units 
Failed to connect to bus: No medium found             

as we can see, the same user doesn’t have access to other processes so we would need to duplicate every process above the namespace until we could acess the media

would duplicate of everything - pulsewire, dbus, etc - even work ?

Relevant

you install program A, it needs and installs libpotato then later you install program B that depends on libfries, and libfries depends on libpotato, however since you already have libpotato installed, only program B and libfries are installed The intelligence behind this is called a package manager

In windows when you install something, it usually installs itself as a standalone thing and complains/reaks when dependencies are not met - e.g having to install Visual C++ 2005-202x for games, JRE for java programs etc

instead of making you install everything that you need to run something complex, the package manager does this for you and keep tracks of where files are

and each package manager/distribution has an idea of where some files be stored

You can freely manipulate NTFS in Linux. Just make sure your distribution has, after kernel >=5.15, enabled it, otherwise you may need to install the ntfs-eg driver. Other than that, Ach Wiki has info that may help you on any distro:

https://wiki.archlinux.org/title/NTFS

I have done something similar to what you want to do, just needed the ntfs-3g driver installed and “Disks” (gnome disks) application would mount/read/write the disks as usual

You can configure this behavior for CLI, and by proxy could run GUI programs that require elevation through the CLI:

https://wiki.archlinux.org/title/Sudo#Using_visudo

Defaults passwd_timeout=0(avoids long running process/updates to timeout waiting for sudo password)

Defaults timestamp_type=global (This makes password typing and it’s expiry valid for ALL terminals, so you don’t need to type sudo’s password for everything you open after)

Defaults timestamp_timeout=10(change to any amount of minutes you wish)

The last one may be the difference between having to type the password every 5 minutes versus 1-2 times a day. Make sure you take security implications into account.

Timeshift, make sure to “include hidden files” to recover any configuration for desktop environments

After a few mess ups, you may find yourself not needing to backup everything, only the file(s) that messed up, and that’s still a good thing to have Timeshift for

IP is like an address to a big skyscraper where a company operates. You are the delivery man and must go to 201.154.76.19 and deliver something. When you get at the reception, you tell them you have a package to deliver to Mrs HTTPS, at room (port) 443. Since Mrs HTTPS is well known and has cleared your entry before, you’re allowed to enter this room and only this room.

If you were to get at the same address and try to access other rooms you would either get refused because they are closed, or if open, someone would specifically need to be in the room so you can deliver something

Malicious actors that wanted access to the building could try to disguise their deliveries and enter the building, that’s why the default policy of most firewalls is “reject” and you specifically need to open a port and have a program listening to it if you want incoming connections.

Already switched to AMD to enjoy it

Yeah, it’s advertised as 160hz and even amdgpu_top (which uses xrandr or something like it) says 159.96hz is the first preferred mode, the second being 100hz

I had this problem before with a Nvidia card which reset to 144hz after an update and I could never enable it again. However it’s a mystery as to why it boots up at 160hz in systemd-boot console, and goes back to 144hz when entering KDE or turning the display off