Mastodon: @user_naa@mastodon.social

  • 6 Posts
  • 30 Comments
Joined 3 months ago
cake
Cake day: August 4th, 2024

help-circle

  • user_naa@lemmy.worldOPtoLinux@lemmy.mlWireguard ping problem
    link
    fedilink
    English
    arrow-up
    2
    ·
    16 days ago
    $ ip a
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
           valid_lft forever preferred_lft forever
        inet [REDACTED]/32 scope global lo
           valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host noprefixroute 
           valid_lft forever preferred_lft forever
    2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
        link/ether [REDACTED] brd ff:ff:ff:ff:ff:ff
        inet [REDACTED]/30 brd [REDACTED] scope global dynamic enp6s0
           valid_lft 327sec preferred_lft 327sec
        inet6 fe80::8e0:afff:feae:17cf/64 scope link 
           valid_lft forever preferred_lft forever
    3: wlp5s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
        link/ether [REDACTED] brd ff:ff:ff:ff:ff:ff
        inet 192.168.0.1/24 brd 192.168.0.255 scope global wlp5s0
           valid_lft forever preferred_lft forever
        inet6 fe80::1291:d1ff:fe5a:2af8/64 scope link 
           valid_lft forever preferred_lft forever
    4: virbr1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
        link/ether 52:54:00:cf:c8:59 brd ff:ff:ff:ff:ff:ff
        inet 192.168.2.1/24 brd 192.168.2.255 scope global virbr1
           valid_lft forever preferred_lft forever
    5: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
        link/ether 52:54:00:bb:da:14 brd ff:ff:ff:ff:ff:ff
        inet 192.168.1.1/24 brd 192.168.1.255 scope global virbr0
           valid_lft forever preferred_lft forever
    6: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master virbr0 state UNKNOWN group default qlen 1000
        link/ether fe:54:00:ec:b8:55 brd ff:ff:ff:ff:ff:ff
        inet6 fe80::fc54:ff:feec:b855/64 scope link 
           valid_lft forever preferred_lft forever
    7: wg0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN group default qlen 1000
        link/none 
        inet 10.0.1.1/24 scope global wg0
           valid_lft forever preferred_lft forever
    
    # route -n
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    0.0.0.0         [REDACTED]    0.0.0.0         UG    0      0        0 enp6s0
    10.0.1.0        0.0.0.0         255.255.255.0   U     0      0        0 wg0
    [REDACTED]    0.0.0.0         255.255.255.252 U     0      0        0 enp6s0
    192.168.0.0     0.0.0.0         255.255.255.0   U     0      0        0 wlp5s0
    192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 virbr0
    192.168.2.0     0.0.0.0         255.255.255.0   U     0      0        0 virbr1
    
    # iptables -L
    Chain INPUT (policy ACCEPT)
    target     prot opt source               destination         
    
    Chain FORWARD (policy ACCEPT)
    target     prot opt source               destination         
    
    Chain OUTPUT (policy ACCEPT)
    target     prot opt source               destination         
    # iptables -L -t nat
    Chain PREROUTING (policy ACCEPT)
    target     prot opt source               destination         
    
    Chain INPUT (policy ACCEPT)
    target     prot opt source               destination         
    
    Chain OUTPUT (policy ACCEPT)
    target     prot opt source               destination         
    
    Chain POSTROUTING (policy ACCEPT)
    target     prot opt source               destination         
    MASQUERADE  all  --  anywhere             anywhere            
    







  • Thank you, it works! But I got weird behavior:

    1. User sddm also cannot execute poweroff (it is ok) but if I press shutdown button in sddm it will poweroff (not ok).
    2. If I press shut down in KDE Plasma I will get black screen and no sddm (I can restart it with systemctl restart sddm from tty and it will work again) How can I fix this bugs?











  • user_naa@lemmy.worldOPtoLinux@lemmy.mlX.org: no screens found
    link
    fedilink
    English
    arrow-up
    4
    ·
    edit-2
    3 months ago

    Kernel driver is loaded

    # lsmod | grep radeon
    radeon               1888256  9
    video                  77824  2 amdgpu,radeon
    i2c_algo_bit           12288  2 amdgpu,radeon
    drm_suballoc_helper    12288  2 amdgpu,radeon
    drm_display_helper    266240  2 amdgpu,radeon
    drm_ttm_helper         12288  2 amdgpu,radeon
    ttm                   102400  3 amdgpu,radeon,drm_ttm_helper
    drm_kms_helper        253952  3 drm_display_helper,amdgpu,radeon
    drm                   749568  16 gpu_sched,drm_kms_helper,drm_exec,drm_suballoc_helper,drm_display_helper,drm_buddy,amdgpu,radeon,drm_ttm_helper,ttm,amdxcp
    
    



  • If you’re using an Intel chip look into GVT-g and consider running Arch from a VM, that’ll be the closest thing to native.

    I want to start clear Arch Wayland session on one my ttys and want to Arch have full direct hardware access.

    The unfortunate thing about running an Arch container from a Debian host is that you’re relying on an older kernel

    I use latest Linux-libre on my Debian machine and everything works well.

    If you are very, very lucky Arch will just work inside the container, but IME that’s fairly rare as systemd often has breaking changes over several releases (and Arch tends to be at least several releases ahead of Debian.)

    As I mentioned earlier I tried running Archbox. It is basically script to easy set up chroot. The main problem was that compositor couldn’t connect to Wayland socket.