Had someone contact me because a browser interface was ‘down’ and it was actually a cert issue. It surprised me that in an IT context, this person didn’t have a basic understanding of SSL certs. They didn’t even know how to add a cert exception.

It got me thinking, what basic ubiquitous things am I a dumbass about outside of IT?

Ive seen lots of ‘fun facts’ compilations, but it would be better to get a wide range of subject suggestions that I can spend 30 minutes each or less on, and become a more capable human.

Like what subjects would plumbers consider basic knowledge? Chemical interactions between cleaning products and PVC pipes?

What would an accountant or a landscaper consider to be so basic its shocking people can live their lives without knowing any of it?

For most areas of expertise, its difficult to know even what the basics are to start with.

  • Contramuffin@lemmy.world
    link
    fedilink
    arrow-up
    28
    ·
    edit-2
    9 months ago

    Microbial pathogenesis here. This one’s a fun one for me, especially since COVID revealed just how illiterate the average person is about diseases. Here’s a couple that I think should be common sense

    • Not all bacteria cause disease. In fact, very few bacteria cause disease. Many bacteria are even helpful to us, so you should really weigh the pros and cons of taking antibiotics if you’re considering using antibiotics.

    • Antibiotics don’t work against viral infections. You’re getting all the downsides of killing helpful bacteria and getting none of the benefits

    • Do not blindly trust your immune system. Your immune system works 100% of 50% of the time. Many white blood cells take the philosophy of murdering everything in sight just to be safe. This can and often does include killing important cells in your body that just happen to be nearby the site of infection. Even if you survive the infection, you will be weakened as a result. If you can avoid getting sick in the first place, avoid getting sick.

    • Vaccines work. I don’t really know what else to say about this one.

    • Viruses and bacteria aren’t hard to kill. There’s many compounds that can kill viruses and bacteria. But humans aren’t hard to kill either. The tricky part is figuring out how to kill viruses and bacteria while also keeping the human alive. Basically: don’t drink bleach. It will kill your bacteria or virus but it’ll kill you too

    • E. coli isn’t a usually bad bacteria. Actually, it’s a very important bacteria that helps us digest food. The reason it gets such a bad reputation is because it’s relatively hard to kill, which makes them a very good way to quickly check if there’s a possible food/water contamination. In other words, the presence of E. coli itself isn’t bad, but finding E. coli does suggest that there might be other, more dangerous bacteria.

    • DO NOT EAT MOLDY FOOD. The fuzzy part that you see is just the fruiting body of the mold, analogous to a flower on a plant. The real body of the mold is an invisible network of roots that tunnel through the core of the food. Even if you cut off the fuzzy portion, you’re still eating most of the mold.

    • idiomaddict@feddit.de
      link
      fedilink
      arrow-up
      5
      ·
      9 months ago

      Can you explain the E. coli point a little more?

      Is it that because it’s hard to kill, it’s a good indicator of the initial contamination, meaning it’s essentially stickier than other bacteria and leaves a longer record that there was contamination?

      Because otherwise being hard to kill makes it seem like it would be a bad indicator to me, in that it would return a lot of false positives (though maybe that’s the goal in this case).

      • Contramuffin@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        edit-2
        9 months ago

        With regards to food and water safety (really, this applies to all safety regulations), you would rather get false positives than false negatives. It’s better to be overly cautious than to be under-cautious. Because if we’re under-cautious, then someone might get sick. So we actually want to pick a common, hardy bacteria that’s easy to grow. There’s several other reasons why E. coli is such a good indicator bacteria, such as:

        • it grows quickly, so we can get test results quickly

        • it’s remarkably easy to distinguish E. coli from other bacteria, so much so that you don’t really even need a microscope. The less technical expertise is required for water testing, the better.

        • they’re usually safe, which lowers the amount of training required for water testers, and also lowers the risk of disease in case a test gets mishandled

        • they’re generally more resistant to water treatment than other bacteria, typically being the last to die. So if we killed E. coli, that’s a good indicator that we’ve also killed the other bacteria

    • bob_lemon@feddit.de
      link
      fedilink
      arrow-up
      4
      ·
      9 months ago

      you should really weigh the pros and cons of taking antibiotics if you’re considering using antibiotics.

      Is that a choice you can make where you’re from? Here in Germany, that is entirely the physician’s choice to make. You cannot get them without a prescription. Although I guess you can ignore the doctor if they tell you to take them. But if you don’t trust your doctor, get another doctor.

      • breakingcups@lemmy.world
        link
        fedilink
        arrow-up
        8
        ·
        9 months ago

        Hello neighbor! I’ve had them prescribed, but when asked if it was really necessary or if I could give it a bit longer to see if my body could deal with it on its own, my doctor got a big smile and told me he could. Then he said that the dominant demographic in my area is very persistent and pushy in demanding antibiotics for the slightest thing so he’s gotten a bit too used to prescribing them.

    • watersnipje@lemmy.blahaj.zone
      link
      fedilink
      arrow-up
      3
      ·
      9 months ago

      Could you say something about why it’s bad to eat moldy food, and why it’s bad to kill the good bacteria in your body? I know your intestines can function less well, is there anything else?

      • Helix 🧬@feddit.de
        link
        fedilink
        English
        arrow-up
        1
        ·
        9 months ago

        why it’s bad to eat moldy food

        For starters, it’s poisonous and tastes like shit.

      • BaumGeist@lemmy.ml
        link
        fedilink
        arrow-up
        1
        ·
        9 months ago

        I am not a Microbial Pathogensist, so I’ll just use the internet’s preferred method of saying something confidently that is probably wrong on some pedantic level and having actual experts climb out of the woodwork to correct me, but…

        Mold isn’t a single organism, it’s actually a colony of many individual microbes that work together, most of the time; there are exceptions since the word “mold” is a lay term as much as it’s a scientific term, and the common usage doesn’t have the same rigor applied (“if it’s slimy/fuzzy, it’s mold” kinda reasoning).

        The colony aspect is important, because you’re probably inhaling mold spores and eating tiny amounts of mold every day. The microbial aspect means that eating a whole colony has the potential to infect you even if your body kills off 99.9% of the microbes.

        As to why an infection is dangerous depends on the type of mold. Some take up resisdence in specific organs and starve the organ cells of vital nutrients, others are carnivorous and eat your tissues/cells, others may eat beneficial bacteria or starve them of vital nutrients, some secrete toxins that are relatively harmless in small doses but deadly with a full-blown infection—penicillin is a great well-known example of this: it’s the chemical the mold uses to kill off bacteria competing for the same resources—, sometimes it’s just the immune system’s response that’s dangerous.

        If you want an example of what such an infection does on our scale, look up everyone psychonaut’s favorite: Ergotism. The Ergot fungus grows primarily on cereals/grains and secretes chemicals that are psychoactive in humans (one of which is the precursor that Dr. Albert Hoffmann first derived LSD from). Unfortunately besides mind expanding insights into the nature of reality, it also comes with a nasty infection that can cause convulsions, painful burning/tingling/freezing sensations, diarrhea, vomiting, gangrene, psychosis, and more.

        That all being said, if you accidentally swallow a bite of moldy bread, you probably don’t need to freak out and call poison control/EMS; just don’t regularly eat moldy food and expect to have your immune system stave off a full-blown infection for long.

      • Contramuffin@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        9 months ago

        Not worth the risk, to be honest. You don’t know how deep the mold has penetrated into the cheese, and without a microscope, you will never know if you’ve shaved off enough to fully remove the mold.

        Also, mold spores are all over the place. They float around in the air. You breathe them in all the time. If you got visible mold growing on a cheese, there’s a good chance that there’s not-yet-visible mold growing in other spots, too.

    • Tar_Alcaran@sh.itjust.works
      link
      fedilink
      arrow-up
      1
      ·
      9 months ago
      • Viruses and bacteria aren’t hard to kill. There’s many compounds that can kill viruses and bacteria. But humans aren’t hard to kill either. The tricky part is figuring out how to kill viruses and bacteria while also keeping the human alive.

      Relevant XKCD: https://xkcd.com/1217/

  • intensely_human@lemm.ee
    link
    fedilink
    arrow-up
    24
    ·
    9 months ago

    Basic computer competency starts with reading the error message.

    I’ve worked in IT and you’d be amazed how many people are stuck with some problem that would be fixed if they just read the error message on their screen.

    For example, it might say:

    Error! The green button needs to be pressed. It’s on your keyboard. It’s green. It also has lettering on it that says PRESS HERE.

    People will bring their computer in, at a total loss for what to do.

    • Potatos_are_not_friends@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      9 months ago

      The customer service manager sent not one, not two, but three emails in one hour demanding our engineers fix this login error that a high valued customer had.

      The error was “username or password was incorrect”.

      I fixed it by resetting their password.

  • Pulptastic@midwest.social
    link
    fedilink
    English
    arrow-up
    19
    ·
    9 months ago

    Don’t use high heat on nonstick pans.

    Assuming we want the same internal temperature, high heat will cook the outside more than low heat. For bread you probably want a bit more heat to get a nice crusty outside. For steaks you want less heat to avoid overcooking most of the meat, then just a quick sear on the outside.

    Don’t overload your pan. If your food is cooking in a bunch of water that came out of the food you are boiling it, not frying it, and it’s going to suck. Put in less food so that water can boil off before it starts boiling your food.

    Don’t overload your cookie sheets either. The center of the pan will not get as hot due to all that cold wet food sucking up all the heat, so the fries on the edge will cook faster than the fries in the middle.

    Sear or roast your brassicas. They taste way better with some browning and lots of oil and salt.

    Measuring food by weight is much easier and much more accurate than measuring by volume with measuring cups and spoons. This is next level awesome if you’re trying to measure something sticky like honey or peanut butter, you can weigh it in the mixing bowl rather than dirtying a measurement device.

    Don’t overvook your meat. Use a fast read meat thermometer. Beef, pork, chicken, seafood, are all much better when cooked.to the proper internal temperature.

    I am not a cooking expert, I am a heat transfer expert with a strong background in chemistry and those skills transfer over to cooking.

    • Asafum@feddit.nl
      link
      fedilink
      arrow-up
      3
      ·
      edit-2
      9 months ago

      Just adding to yours as I’m a nerd for gardening and it isn’t common knowledge: brassicas are vegetables like broccoli, cabbage, mustard, etc

      Also on the topic of brassicas, if you see the little white “butterflies” with a black dot on each wing, those are cabbage moths and the bane of a gardeners existence! Unless an entomologist can chime in and say why they’re actually great lol

    • BonesOfTheMoon@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      9 months ago

      I find high heat in stainless steel pans is very good though? Like it works better to heat the pan and then add your oils. They’re so much better.

      • Pulptastic@midwest.social
        link
        fedilink
        English
        arrow-up
        2
        ·
        9 months ago

        Definitely. I agree that in stainless, it is best to get hot first, then add oil, then add food. It is also best to let the food sit still for a bit on the heat, as it browns it will naturally start to detach to flip or remove. Same works for cast iron but easier

  • boatswain@infosec.pub
    link
    fedilink
    arrow-up
    11
    ·
    9 months ago

    If you’re pulling on a rope really hard, don’t wrap it around your hand to get a better grip. If it starts to pull away from you, you won’t be able to let go, and if someone runs up to help and starts hauling on the end, your hand is going to be in a world of pain.

  • blackstrat@lemmy.fwgx.uk
    link
    fedilink
    arrow-up
    10
    ·
    9 months ago

    How to do basic DIY. Do you know all the functions of your drill? Can you screw something in to wood, brick, plaster - for dab and cavity? What fixings and screw types should you use? Can you re-wire a plug? Change a tap? Wire an Ethernet connector and punchdown? Balance your books, calculate your tax, basic car maintenance…?

    As a software engineer or IT person it’s easy to think we’re all so very smart, but anyone skilled in ANYTHING will know so much you don’t in their own subject.

    Basically everyone is an idiot about most things.

  • twice_twotimes@sh.itjust.works
    link
    fedilink
    arrow-up
    9
    ·
    9 months ago

    I’m a developmental psychologist, and the biggest thing is people just not knowing what “psychologist” means.

    The tl;dr here is:

    Most psychologists aren’t therapists. Most therapists aren’t psychologists. If you’re looking for quality mental health care, don’t revere the “doctor.”

    A “psychologist” refers to someone with a PhD in psychology (or someone who does psychological research within an interdisciplinary field, like education or human development). Critically, a psychologist is a researcher (and often an educator at the college+ level). Psychology is a massive field, and the most common subfields are cognitive, developmental, social, clinical, and neurobio.

    A “clinical psychologist” is a research psychologist is the particular subfield of clinical psychology. Along with research, clinical psychologists usually learn clinical psychotherapy practices and then may (or may not) choose to incorporate offering therapy into their career. A similar path is the “PsyD” (doctor of psychology) which also falls under the “psychologist” heading. Like a clinical psych PhD, a PsyD has had advanced training in research and practice, but the balance of the degree leans much more toward practice. People who opt for a PsyD rather than PhD usually plan to pursue a fully clinical career, but are qualified to do research as well.

    A “therapist” is someone who is trained and licensed to provide clinical psychotherapy. Most therapists in the US have a master’s degree in social work (or a few others, like counseling psychology), specialized clinical training in one or more areas or treatments, and additional state licensure requirements. Clinical and counseling psychologists (with PhDs) can act as therapists if they get and maintain licenses, but this is a small fraction of therapists. PsyDs make up another chunk, but the majority do not have a terminal PhD/PsyD.

    As a psychologist, I don’t say this because I think my PhD makes me better than someone with an MSW — the reverse! I hear people get advice to not see a therapist if they are “just” a social worker without a PhD. Meanwhile people come up to my dumbass self and think I am qualified to act as a therapist or like I know anything about clinical or abnormal psychology. Like, wanna know how 2-year-olds and 12-year-olds use nonverbal signals like shrugs to facilitate conversational interaction differently from each other and from adults? No? Then I am not the person you’re looking for. Go talk to that extremely knowledgeable and well-trained person with an MA.

    …Meanwhile a “psychiatrist” is a whole other thing. They have an MD and can prescribe medication. Very rarely they may also offer psychotherapy, but that’s hard to make happen in the US a healthcare system.

  • jballs@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    9
    ·
    9 months ago

    I’m constantly amazed at how many people don’t understand the concepts of basic finance and how compound interest works.

    Years ago, I brought my laptop with me to buy a car so I could plug all the numbers into a quick amortization schedule. The sales person offered me a choice of $1,500 cash back or 1.9% financing instead of the typical rate a few percentage points higher.

    I plugged the numbers into my spreadsheet and saw taking the cash back would cost me a couple grand more than the lower finance rate. When I told him I wanted the finance rate instead of the cash back, he mentioned that I was the only person he’d seen not take the cash back.

    Maybe he was pulling my chain, but in my experience, the average person doesn’t know what compound interest is, let alone what an amortization schedule is.

    • teawrecks@sopuli.xyz
      link
      fedilink
      arrow-up
      4
      ·
      9 months ago

      That’s wild. When I was getting a mortgage for my house, the lender was like “your interest rate is X, but if you pay $Y you can add a ‘point’”. I’m like “wtf is a point?” Turns out, it’s a roundabout way of saying, higher down payment = lower interest rate.

      It already wasn’t obvious what their jargon meant, so for you to have a sales person offering the exact opposite of what my lender did, actively bribing customers to take a worse deal for themselves, it’s just…scummy.

      • jballs@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        2
        ·
        9 months ago

        Yeah, buying points is a bit different though and again is a great example of why everyone should at least have a basic understanding of how to make an amortization schedule.

        Buying points isn’t exactly the same as a higher down payment, because that money doesn’t take any principal off your loan. It’s basically paying interest up front, giving the lender a lesser amount now rather than a greater amount later.

        Shit gets complicated real quick, so plugging it into an Excel spreadsheet makes it much more clear.

        • teawrecks@sopuli.xyz
          link
          fedilink
          arrow-up
          2
          ·
          9 months ago

          Cool, see I didn’t even know about that difference lol. To me it amounted to “do you want to pay us more up front for a lower monthly rate”, which just sounded like the same thing as a larger down payment.

    • Shady_Shiroe@lemmy.world
      link
      fedilink
      arrow-up
      3
      ·
      edit-2
      9 months ago

      EDIT: Sorry didn’t mean to reply to your comment, I’m on mobile, can’t tell posts from comments.

      I believe knowing a little bit on how a car works helps you understand why maintenance is important or from getting scammed at mechanics, I loved old commercials like these that explain in such an easy way. https://www.youtube.com/watch?v=yYAw79386WI

      Some skills I wanna pick up is how to micro solder, I deal with a lot of tech and sometimes you just need a type c port replaced and soldering iron is not the easiest tool for tiny pins.

      • Tar_Alcaran@sh.itjust.works
        link
        fedilink
        arrow-up
        3
        ·
        9 months ago

        Some skills I wanna pick up is how to micro solder, I deal with a lot of tech and sometimes you just need a type c port replaced and soldering iron is not the easiest tool for tiny pins.

        Good news, the broken component is a common 2 dollar chip!

        Bad news, it’s an SMD, and in the middle of a giant block of plastic and 2 more circuitboards.

      • ∟⊔⊤∦∣≶@lemmy.nzOP
        link
        fedilink
        arrow-up
        2
        ·
        9 months ago

        Learning about cars, engines and motorbike maintenance at this stage in life really opened my eyes. I could have easily been a mechanic or an engineer if I had the access to this knowledge when I was younger.

        Now I do as much of my own maintenance as I can, and I’m pretty sure my engine will hit 400K before I start getting serious issues. None of it is overly complicated or difficult, and saves me money in the short and long term.

        • Shady_Shiroe@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          9 months ago

          I was fortunate to have a dad who had the tools, space, and time to teach me how to do repairs, with the things he taught me I can save a lot of money buying a beat up car and fixing it up for usually 1/3 to half the price of a used one.

      • bloodfart@lemmy.ml
        link
        fedilink
        arrow-up
        1
        ·
        9 months ago

        For microsoldering: you want the quick 861dw or one of the knockoffs and a bunch of tips. Sometimes you can get away without a microscope but usually you need one of those too. You need a swing arm mount for it because you often won’t be able to position your board under the objective of a tabletop mount.

        You 100% cannot get away without a fume extractor. You’re gonna need low melt solder and flux, so you also need to be wearing disposable gloves.

        You need a board holder because once all the solder in the area is liquified you don’t want the heavier parts sliding off the board because it’s propped up on a piece of wood at a ten degree angle.

        If you wanna extend the amount of work you can do with just a decent iron: use flux and low melt to get everything on your usbc liquid at the same time so you can lift it off the board.

        • Shady_Shiroe@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          9 months ago

          I found that using a soldering iron to be unweildy, which could either be a bad iron or my poor skills. I was thinking of maybe investing in future for one of those hakko hot air rework stations and see if it is any easier. Right now that’s on hold, but totally something I want to try in the future, maybe as a hobby.

          • bloodfart@lemmy.ml
            link
            fedilink
            arrow-up
            1
            ·
            9 months ago

            Start with the hakko 888 or the weller equivalent. Learn how to solder big stuff first like tinning wires without burning up the insulation, big through hole joints according to the nasa guidelines, bell splices etc. it’s easier to see and judge how things are going with big stuff because you can see it better.

            Use different tips to see what they do.

            Remember that soldering is just brazing. You’re joining two metals by introducing a third.

            Don’t start with a project you want to finish, just join a bunch of junk together, pull parts you don’t care about from old circuit boards and put different parts in their place.

            Make little sculptures out of your trash.

            Cheat with different kinds of flux till you don’t need to anymore.

            Do the same things with smd parts.

            It takes a long time to get good at soldering and no matter what anyone says you can’t just jump past the iron to hot air.

            I mean, it’s possible. You’ll just never be able to fix mistakes or bridges you make with the hot air.

    • ShepherdPie@midwest.social
      link
      fedilink
      arrow-up
      2
      ·
      9 months ago

      Have you told this story before, possibly on reddit? I swear I’ve read this verbatim including the part about the laptop and “I was the only person who took the lower APR.”

      • ShepherdPie@midwest.social
        link
        fedilink
        arrow-up
        2
        ·
        9 months ago

        You can also use an interest calculator or multiply the payment by the term length to see how much over the purchase price you’ll pay in interest.

        This is why it’s important to haggle over the purchase price and not the monthly payment. Never ever negotiate over the monthly payment, or you’re likely to get stuck with a 96-month loan at 23% interest.

        • jballs@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          3
          ·
          9 months ago

          My mother in law bought a truck the same week I bought my car. I mentioned that I got a 1.9% interest rate. She got a 22% rate!!! I was absolutely floored when I found out what she did.

            • jballs@sh.itjust.works
              link
              fedilink
              English
              arrow-up
              2
              ·
              9 months ago

              Yeah I was absolutely disgusted when I found out. It made me realize that there’s definitely a “poor tax”. If you don’t have good credit and/or aren’t informed enough to pay attention to interest rates, you’re basically going through life on hard mode.

                • jballs@sh.itjust.works
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  9 months ago

                  Lol that just reminded me of the /r/justbootthings subreddit. So many stories of 24% APR loans on Dodge Chargers.

  • Timecircleline@sh.itjust.works
    link
    fedilink
    arrow-up
    9
    arrow-down
    1
    ·
    9 months ago

    Not really completely on topic, but there’s an app called Kinnu. It’s free, and gamifies learning- like Duolingo but for a really wide variety of topics. So far I’ve done the pathways on learning, ikigai (Japanese concept of reason for living/being), logic and cognitive biases. They have pathways on other things too, like history, various sciences, philosophies, even personal finance (probably the next one I do).

    It’s a great way to kill 2-5 minutes a day and Ive learned a ton.

  • idiomaddict@feddit.de
    link
    fedilink
    arrow-up
    8
    ·
    9 months ago

    I work at a bakery. The number of people who ask for half a loaf of bread (normal to buy in this area, but they’re not pre-cut), then get upset when I pick up a whole loaf so I can cut half off is mind blowing to me. I’m also not a native speaker and autistic, so I’m wary of being inadvertently way too rude if I comment on it.

  • Wirlocke@lemmy.blahaj.zone
    link
    fedilink
    arrow-up
    8
    ·
    9 months ago

    This is typically why education and experience are still needed if you’re self taught.

    I know from learning programming that people online don’t explain “common sense” problems. So many times you’ll look up a problem and see people talk about huge refactors or complex niche fixes when in reality you misplaced a single line of code.

  • JeeBaiChow@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    9 months ago

    If people say ‘i have excel competence’, the difference could be between ‘i can resize fonts and do tables for my company forms because I don’t know how to do them in word’ to ‘fully modelling a business plan for a Telco, including it’s subsidiary units’. Make sure you test for the level of competence you’re after.

    Learn a new formula every now and then, or at very least learn to read other people’s formulas, then google what you don’t know. Literacy in any field is the result of a long process of learning.

    (Reread your question) Outside of IT: if an appliance stops working, it’s sometimes just a fuse that needs replacing. It’s cheap and easy to do.

  • Bob@feddit.nl
    link
    fedilink
    arrow-up
    6
    ·
    edit-2
    9 months ago

    Basic knife skills is something I’m often almost shocked by. I had a housemate last year who’d bought herself a decent Sabatier chef’s knife (like this) but the way she cut veg, she may as well have been using a sharpened bit of moss. All the gear and no idea. Thankfully she forgot to take it with her or something when she moved out so it’s my knife now.

    • ∟⊔⊤∦∣≶@lemmy.nzOP
      link
      fedilink
      arrow-up
      2
      ·
      9 months ago

      I would also add knowing how to sharpen a knife on a stone and never using the knife-blunteners that come prebuilt into knife blocks these days.

    • poo@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      9 months ago

      What can I do or watch to improve my knife skills? I’m aware of how woefully incompetent I am when it takes me like 2 minutes to dice an onion the way Ramsay does in 10 seconds lol

      • bloodfart@lemmy.ml
        link
        fedilink
        arrow-up
        3
        arrow-down
        1
        ·
        9 months ago

        For onions specifically:

        Sharpen your knife and make French onion soup.

        You’ll cut so many that you’ll figure it out.

        For everything else: pinch grip and crab your other hand. The pinch grip is where you rely on a pinch between thumb and forefinger on the blade just in front of the handle to grab the knife. It’s the choke up of holding a knife and will make you much safer and give more control. Crabbing your other hand is where you curl your fingers up like ginger roots instead of letting them extend out like little baby carrots. It will keep you from being hurt when something goes wrong and allow you to go much faster because you’re not having to slow down to avoid cutting yourself.

      • Bob@feddit.nl
        link
        fedilink
        arrow-up
        2
        ·
        9 months ago

        Keep your knife sharp, remember that you cut by running the blade along something rather than pressing into it, and keep your fingers out the way by doing the claw with the other hand and keeping your grip firm. Then just practise!

  • Helix 🧬@feddit.de
    link
    fedilink
    arrow-up
    6
    arrow-down
    1
    ·
    9 months ago

    Don’t brake in curves, whether you have a car or bike. Especially in slippery conditions.

      • Helix 🧬@feddit.de
        link
        fedilink
        English
        arrow-up
        3
        arrow-down
        1
        ·
        9 months ago

        Oh most people can’t drive. Recently read an article 90% of drivers overestimate themselves. I know I’m above average but by far not a good driver. I still try to become better.

  • Hatch@lemmy.ml
    link
    fedilink
    arrow-up
    5
    arrow-down
    1
    ·
    9 months ago

    As someone who works with tech, here is my 2 cents on basic knowledge.

    If your computer is “not working” restarting the computer can generally fix 80 percent of the issues. We are not trying to make you mad, this is literraly first thing I am doing if you present me a problem.

    Stop downloading things from unknown sources.

    Use generic effects/fonts on your powerpoint. Just because you bought something cool doesnt mean it will magically transfer when you pass your presnetation to another computer for your presentation. (Microsoft does not migrate your paid effects)

    For gamers Stop playing pvp on your pc/console on wifi, are you a mad?

    Everyone in general We are at an age of computers. Learn how to type, it will save you tremendous amount of time, literally.

      • Hatch@lemmy.ml
        link
        fedilink
        arrow-up
        0
        ·
        9 months ago

        Yes, i have seen it happen several times and i get blamed why its not showing on the show laptop. The moment i ask, “did you purchase any add on effects?” i feel like a customer service telling a customer your credit card was denied.

        • grabyourmotherskeys@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          9 months ago

          That’s just wild. I’m in meetings with slides constantly and never heard of this. We’ll, now I have a new rabbit hole to go down (as in “finding the most ridiculous of these”).